Hydraulics International, Inc. (HII) has over 40 years history of cutting edge aircraft ground support equipment (GSE) ingenuity and new product technology innovation. HII is one of the world’s leading manufacturers of both military and commercial aircraft ground support equipment (GSE), especially in the supply of our new generation Hydraulic Test Equipment, which will keep hydraulic system in aircraft, helicopter, aircraft hydraulic flight components, hoses, pipes, tubing, valves, valve actuation etc. operating safely and effectively. Our Hydraulic Test Equipment are also robustly designed to provide diagnostic instrumentation for innovative testing, self-calibration, maintaining, servicing and troubleshooting of hydraulic equipment, components & system under testing. HII is the preferred Provider of our new generation Portable Hydraulic Test Stands, Stationary Hydraulic Test Benches etc. to the military & commercial aerospace industry.
FA-50 Bomb Loaders
P/N: 971480-30 (NSN: 1730-01-446-2422)
Diesel Engine Drive
P/N: 99511-100 (NSN: 1730-01-482-1317)
Electric Motor Driven
Robotic Arm is capable of loading aerial stores over 15 feet and below 27 inches of ground clearance.
Standard equipment for loading/unloading transporting of aerial stores including munitions, fuel tanks, pylons, special weapons, & SAR packs weighing up to 7,000 lbs onto/into tactical aircraft.
MUNITIONS HANDLING AND LOADING UNIT (MHU-83D/E & MHU-83E BOMB LOADERS)
OPERATIONAL STATUS: Qualification tested per USAF specification MIL-T-38646 REV. C Certified for handling nuclear weapons in accordance with requirements of USAF Weapons Laboratory, Kirtland AFB, NM, and USAF/LG – Airforce Manual 91-118 Safety design and Evaluation Criteria for Nuclear Weapons Systems. CE certified per European Machinery Directives and Standards of EN60204-1:1997. Engine exhaust emission is certified to TIER 2 of European Emission Standards. Noise emission is limited to less than 85 dBA at one meter distance of the unit or operator station per latest issue of ISO 3744.
replaces MJ-1A & MJ-1B
P/N: 8141050-70 (NSN: 1730-01-491-1557)
Diesel Engine Driven
P/N: 050025-100 (NSN: 1730-01-536-6388)
Electric Motor Driven
MJ-1E AERIAL STORES LIFT TRUCK – Justification & Approval
Hydraulics International Inc. Wins $8.83 Million Federal Contract (Date: September 19, 2015)
Hydraulics International Inc. was awarded an $8,835,210 sole-source federal contract by the U.S. Air Force Life Cycle Management Center, Robins Air Force Base, Georgia, for the manufacture and supply of 62 MJ-1E aerial stores lift trucks.
Office: Air Force Material Command
Location: PK/PZ – Robins AFB
Standard equipment for loading/unloading & transporting of aerial stores including munitions, fuel tanks,
pylons, special weapons, & SAR pack weighing up to 3,000 pounds onto/into tactical aircraft.
Latest generation of diesel or electric powered medium range ASLT with 4 Wheel Steering and Remote Controller
Standard equipment for uploading, downloading, and transporting aerial stores such as bombs, missiles, fuel tanks, pylons, and special use pods weighing up to 3,800 lbs/1723 kgs onto/into aircraft.
AERIAL STORES LIFT TRUCK (MJ-1C & MJ-1E BOMB LOADERS)
OPERATIONAL STATUS: Environmental tested per MIL-E-4970 (-65oF to 160oF). Qualification tested to insure compliance with the MJ-1A test requirements. Certified for handling nuclear weapons in accordance with requirements of USAF Weapons Laboratory, Kirtland AFB, NM. EMI tested and qualified for Radiated Emissions (RE102), and Radiated Susceptibility (RS103) per MIL-STD-461D and MIL-STD-462D. CE certified per European Machinery Directives and Standards of EN60204-1:1997. Engine exhaust emission is certified to TIER 2 of European Emission Standards. Noise emission is limited to less than 80dBA at one meter distance of the unit or operator station per latest issue of ISO 3744.
MJ-1 Bomb Loader Accessories
Bomb Tie Down Strap
MJ Fork Adapter
MJ-1 Fork Adapter
MJ-1 Truck Fork Stand
2011©Copyright HII Group. All Rights Reserved