*
Airlines (Hydraulic Test Stands / Carts / Rigs)
PORTABLE HYDRAULIC TEST STANDS OR TEST RIGS (Large to Narrow Body Aircraft)
(Electric Motor Driven)
Phosphate Ester Hydraulic fluid (BMS3-11) skydrol , or as specified by customer.
30 GPM at 5000 PSI, per system or 60 GPM at 5000 combined.
HIP-E-12SS-2Z
This PHTS is mounted on a towable and steerable four-wheeled trailer with pneumatic tires, self-contained, dual system, designed to check performance and operating characteristics of aircraft hydraulic systems. Each system is independently controlled and capable of delivering variable output pressure and flow in an Open and Closed Loop mode without the necessity of starting the aircraft engine. It also supports aircraft reservoir filling. The Cart is electrically driven and can operate on 460VAC, 60 Hz or 380 VAC, 50 Hz, 3-Phase. Major components include two (2) hydraulic pumps, one for each system, each driven by a 100 HP motor, a 120 gallon useable common reservoir, filters, manifolds and an integrated purification system.
There are sensors and transmitters to monitor the hydraulic fluid level, temperature, pressure and flow. These sensors provide warning and shut down if the hydraulic fluid pressure, temperature and level are not within the required operating range. The main instrument panel is a touch screen Human Machine Interface (HMI) that provides the operator with some control of the system operation and status. An emergency stop switch on the instrument panel provides complete shutdown of the system. A Programmable Logic Controller (PLC) provides, control, data manipulation and communication to the HMI via an Ethernet link. The HMI provides certain essential operating controls, information for the operator and maintainer such as system pressure, system flow, fluid temperature, reservoir fluid level, etc. An interactive diagnostic display is provided to warn the operator of any condition that is outside of the normal operating parameters.
(Electric Motor Driven)
(Diesel Engine Driven)
*
Portable Hydraulic Test Stands (Dual System) which allow servicing and testing of all large and mid size body aircraft – such as MD-11, Boeing B787, B777, B767, B747, L1011, DC10, AIRBUS A300, A310, A320, A330, A340, A350, A380 & A400M or as long as the capacity of the hydraulic system is within the range of required test stand flow & pressure.
Test Medium: Skydrol 500A and B, HyJet IV and Vor as specified by customer when ordering.
Flow and Pressure Rating: 55 GPM at 5,000 PSI.
*
Medium: Skydrol 500A and B, HyJet IV and Vor as specified by customer when ordering.
Flow and Pressure Rating: 65 GPM at 3,100 PSI (HIP-10SS)
Flow and Pressure Rating: 55 GPM at 3,000 PSI (HIP-9SS)
*
(Electric Motor Driven)
(Diesel Engine Driven)
Portable Hydraulic Test Stands which allow servicing and testing of all narrow body aircraft such as Boeing B737, B757, AIRBUS A318, A319, A300, A310, A320, A321, C919, G550, CRJ, ARJ21, ERJ145, SAAB340, ATR72, Superjet 100, BAE146, F28 etc or as long as the capacity of the hydraulic system is within the range of test stand flow and pressure.
Medium: Skydrol 500A and B, HyJet IV and V, or as specified by customer when ordering.
Flow and Pressure Rating:
30 GPM to 35 GPM at 3,000 PSI.
OR
28 GPM @ 3,500 PSI
Can operate up to 6,000 feet!
*
PORATBLE HYDRAULIC TEST STANDS OR TEST RIGS (Regional Jet)
(ELECTRIC SINGLE SYSTEM)
Medium: Skydrol 500A and B, or as specified by customer when ordering.
Flow and Pressure Rating: 0 GPM to 5 GPM at 3,000 PSI
*
(ELECTRIC SINGLE SYSTEM)
Medium: Skydrol 500A and B, or as specified by customer when ordering.
Flow and Pressure Rating: 0 GPM to 10 GPM at 3,000 PSI
*
(ELECTRIC SINGLE SYSTEM)
Medium: MIL-H5606 or MIL-H-83282, or as specified by customer when ordering.
Flow and Pressure Rating: 0 GPM to 6 GPM at 3,000 PSI
*
(ELECTRIC SINGLE SYSTEM)
Medium: MIL-H5606 or MIL-H-83282, or as specified by customer when ordering.
Flow and Pressure Rating: 0 GPM to 15 GPM at 3,000 PSI
*
(ELECTRIC DUAL SYSTEM)
Medium: MIL-H5606 or MIL-H-83282, or as specified by customer when ordering.
Flow and Pressure Rating: 0 GPM to 10 GPM at 3,000 PSI
*
Portable Hydraulic Power Supply.
Diesel Engine Driven
Single System, Model: HIP-D-1
Test Medium: Hydraulic fluid, MIL-H-5606/MIL-H-83282
or as specified by customer on order
Flow and Pressure Rating: 10 GPM @ 3,000 PSI
*
*
Portable Hydraulic Power Supply. Diesel Engine Driven,
Single System, Model: HIP-D-2-HPU
*
*
*
*
A proven Unit used to support Bombardier’s Aircraft.
Portable Hydraulic Power Supply
Electric Motor Driven,
Dual System, Model: HIP-E-2Z-1
*
*
*
*
*
Model: A/M27T-3, P/N: 88177-100, NSN: 1730-00-541-8529
Size: 24″wide, 37 1/4″ high and 56″ long
Medium: MIL·H-5606, MIL-H-83282 or as specified by customer on order
Flow and Pressure Rating:
6 GPM at 3,000 PSI, 4 GPM at 5,000 PSI
*
NSN: 4920-01-110-0705 (Diesel Engine Driven)
Medium: MIL·H-5606, MIL-H-83282 or as specified by customer on order
Flow and Pressure Rating:
Low Pressure Boost: 25 GPM at 55 PSI, 2,500 RPM
High Pressure: 20 GPM at 3,000 PSI, 10 GPM at 5,000 PSI, 2,500 RPM
Size: 50 3/4″wide, 50 high and 83 3/4″ long
NSN: 1730-00-541-8529 (Electric Motor Driven)
Medium: MIL-H-83282 or as specified by customer on order
Flow and Pressure Rating:
Low Pressure Boost: 25 GPM at 55 PSI, 3,520 RPM
High Pressure: 20 GPM at 3,000 PSI, 10 GPM at 5,000 PSI, 3,520 RPM
Size: 50 3/4″wide, 49 high and 83 3/4″ long
*
PD 35-94-002 (Hydraulic Purification Systems)
HPS removes:
1) Particular contaminations using two 2 µm absolute filter element
with cleanliness level equal or better than NAS 1638 Class 2.
2) 100% water.
3) 100% entrained gases.
4) 98% of dissolved gases.
5) Chlorinated solvents to less than 200 PPM.
*
2011©Copyright HII Group. All Rights Reserved