AIRCRAFT, Fuel Cell Entry Cart

Hydraulics International, Inc. (HII) has over 40 years history of cutting edge aircraft ground support equipment (GSE) ingenuity and new product technology innovation. HII is one of the world’s leading manufacturers of both military and commercial aircraft ground support equipment (GSE), especially in the supply of our new generation Hydraulic Test Equipment, which will keep hydraulic system in aircraft, helicopter, aircraft hydraulic flight components, hoses, pipes, tubing, valves, valve actuation etc. operating safely and effectively. Our Hydraulic Test Equipment are also robustly designed to provide diagnostic instrumentation for innovative testing, self-calibration, maintaining, servicing and troubleshooting of hydraulic equipment, components & system under testing.  HII is the preferred Provider of our new generation Portable Hydraulic Test Stands, Stationary Hydraulic Test Benches etc. to the military & commercial aerospace industry.

Aerospace Ground Support Equipment

BREATHING AIR SUPPLY, Model HIP-AB-2500-15

*

AIRCRAFT, Fuel Cell Entry Cart

HIP-AB-2500-15 Fuel Entry Cell Cart Aerospace Ground Support Equipment

AIRCRAFT, Fuel Cell Entry Cart

*

Item

Characteristic

Overall   Unit Capacity: Complies     with OSHA air breathing standards per   Federal Regulation Title   29, Chapter XVIII
(Part   1910.134(d) and CGA standard for Grade   “D” breathing air,   specification G-7.1-1966
4   Outlets to respirator @ 5 SCFM @ 15 PSIG
10 min.   supply to respirator for Emergency use from   auxiliary system
Variable     pressure 1 to 60 PSIG
Operating   Conditions:
Ambient   temperature range -40o to   + 51.7oC (-40oF to + 125oF)
Altitude Sea   level to 6000 feet
Relative  humidity 0% to   100% of operating temperature of 51.75oC (125oF)
Operation   position Up to 8   ½o from horizontal
Tow   speed   15 MPH   max. over   improved roads
Cramping   angle 45o
Road   clearance 8   inches
Overall   physical characteristics Height:   45”; Length 60”; Width   56”; Gross: 1500 pounds dry weight   approximately
System   Components:
Supply 100   PSIG plant   air
Filtering  system Finite   coalescing Filtering system
Monitor Air   flow monitor and Carbon monoxide   monitoring
Flow 5 SCFM   to respirators
Temperature Range 0o to   +100oF range
Filtration Primary   Coalescing .3 to .6 micron particles. Secondary Activated Charcoal .5 to 2   PPM
Pressure   Hose ¾” x   200 ft.   mounted on hose reel
Respirator   Hose 3/8” x   200 ft. or 300 ft. on hose   reels
Power:
Input   power 120 VAC   60 Hz
Auxiliary   Power 12 VDC   Thixotropic Gel Lead   Acid Rechargeable Backup Battery
Trailer   and Cabinet:
Construction Welded   steel
Pivot   Point Cramp   Angle 30deg, outside   turning radius   124 in. inside     turning radius 66 in.
Tire pressure Pneumatic,     480 X 8, tubeless, 16.6 diameter x 4.8 width   (foam filled if   desired)
Springs Leaf   type
Brake Hand   operated,   parking brake
Steering Knuckle   type with tow bar
Cabinet Metal   enclosure with access   panels, hinged   doors, storage compartment     and weather resistant properties

*

2011©Copyright HII Group. All Rights Reserved