Instrument Verification Set (IVS)

   Hydraulics International, Inc. (HII) has over 40 years history of cutting edge aircraft ground support equipment (GSE) ingenuity and new product technology innovation. HII is one of the world’s leading manufacturers of both military and commercial aircraft ground support equipment (GSE), especially in the supply of our new generation Hydraulic Test Equipment, which will keep hydraulic system in aircraft, helicopter, aircraft hydraulic flight components, hoses, pipes, tubing, valves, valve actuation etc. operating safely and effectively. Our Hydraulic Test Equipment are also robustly designed to provide diagnostic instrumentation for innovative testing, self-calibration, maintaining, servicing and troubleshooting of hydraulic equipment, components & system under testing.  HII is the preferred Provider of our new generation Portable Hydraulic Test Stands, Stationary Hydraulic Test Benches etc. to the military & commercial aerospace industry.

        Instrument Contamination System (ICS)

Instrument Verification Set (IVS)

Instrument Verification System
   P/N: 101199-100 (NSN: 4920-01-607-2985)
IVS
 Instrument Verification Set

Instrument Verification Set (IVS)  is a portable instrument verification and diagnostic measuring tool designed to verify Flow Rate, Pressure & Temperature of hydraulic systems and instruments. Hydraulic Quick Disconnects (i.e. -12, -16 & -24) from GSE are integral built for connecting to our IVS and -8 for can be customized using Adaptors. Although our IVS was built primarily to support our next generation ground support equipment like our UHTS, UTHTS & JEHA MKIV (Hydraulic Test Bench), it can be used to calibrate test carts or test benches or instrument, in which they are fitted with flowmeters or pressure transducers or temperature sensors.

These devices (flow-meters or pressure transducers or temperature sensors) do not have to be dismantled for sending over to approved test laboratory for calibration by using our IVS connected on the required equipment. Besides being assigned with NATO Part Number, our IVS is certified and traceable to NIST. Our IVS can be sent over to HII for re-calibration or preferably to in-country, Laboratory Accreditation Company.

*

 

Instrument Contamination System (ICS)

Due to the high contamination of F-16 aircraft, Hydraulics International, Inc. (HII) recently developed a new product for the USAF. The Instrument Contamination System / High Flow Manifold (ICS/HFM) is used for measuring hydraulic fluid particulate and water contamination including for flushing the hydraulic test stand hoses prior to connection to aircraft. This unit is qualified on the F-16 aircraft as well as other military aircraft and a NSN will be assigned to it within the next few weeks by USAF. Also this product is in progress of being listed as part of the mandatory GSE required for supporting both the F-16 and F-15 aircraft by Hill Air Force Base (AFB).

INSTRUMENT CONTAMINATION SYSTEM/ HOSE FLUSHING MANIFOLD (ICS/HFM)

P/N: 101199-500 & NSN: 4920-01-654-1985

The ICS/HFM is a self-contained, enclosed, portable system that provides inline particulate and moisture contamination measurements in hydraulic fluid, provides regulated pressure within a range of 0-5000 PSI, and also allows flushing of hydraulic hoses prior to connection to the aircraft. The ICS/HFM is powered up by 115VAC 50/60 Hz or on-board battery
electrical power. The ICS/HFM consists of an in-line hydraulic system with a pressure and flow throttling valve, two supply -12 and -16 quick disconnects and two return -12 and -16 quick disconnects. The hydraulic system allows the flow through the panel mounted Contamination Sensor (CS) which reads particulate contamination class of the fluid and Moisture Sensor
(MS) which reads moisture contamination in parts per million (PPM). Supply pressure in the hydraulic system is monitored by a 0-6000 PSI analog pressure gauge on the panel.

Instrument Contamination Set
Instrument Contamination Set (ICS)
Instrument Contamination System

 

Instrument Contamination System (ICS)

*

INSTRUMENT CONTAMINATION VERIFICATION SYSTEM (ICVS)

P/N 101199-200 & NSN:4920-01-630-8302

Instrument Contamination Verification System (ICVS) is a portable instrument verification and diagnostic measuring tool designed to verify flow, pressure, temperature and contamination class of hydraulic systems and instruments. Flow rate is measured by turbine flow meter, an effective and reliable flow measurement technology. Temperature sensor is Microprocessor based with rugged, corrosion-resistant 316L stainless steel housing. Pressure transducer is based on a robust and long-life thin-film sensor. ICVS is certified and traceable to NIST.

Instrument Contamination Verification System

 

Instrument Contamination Verification System (ICVS)
Instrument Contamination Verification Set (ICVS)

 

Instrument Contamination Verification Set (ICVS)

*

FLOW, PRESSURE, TEMPERATURE, CONTAMINATION VERIFICATION / CALIBRATION SET

P/N 101199-600

Instrument Contamination Verification Set Skydrol (ICVSS) is a portable instrument verification and diagnostic measuring tool designed to verify flow, pressure, temperature and contamination class of hydraulic systems and instruments. Flow rate is measured by turbine flow meter, an effective and reliable flow measurement technology. Temperature sensor is
Microprocessor based with rugged, corrosion-resistant 316L stainless steel housing. Pressure transducer is based on a robust and long-life thin-film sensor. ICVSS is certified and traceable to NIST.

Instrument Contamination Verification Set Skydrol

 

Instrument Contamination Verification Set Skydrol (ICVSS)
Instrument Contamination Verification System Skydrol

 

Instrument Contamination Verification System Skydrol (ICVSS)

Our high pressure Hydrostatic Testing EquipmentHydrostatic Power Packs etc. can also be customized to provide versatile service in all static, high pressure testing applications including but not limited to valves, pipelines, hoses, cylinders, pressure vessels and components, valve actuation and any other type equipment requiring high-pressure static testing as required by Aerospace, Aviation, Oil & Gas, Chemical / Petrochemical, Hydrocarbon Processing, Pharmaceutical, Food, Power, Energy etc.

Flowmetrics Inc is a leading manufacturer of Flow Metering / Analyzing / Totalizing Systems including In-Line and Insertion Turbine Flowmeter, Rotameter, and associated Flow Computers. For more than 35 years, they are recognized for superior Flow Measuring Products / Services and specialized Fluid Flow Systems.Turbine Flowmeters, Flow Computers, Positive Displacement Flowmeters, Signal Conditioners, Batch Controllers, Variable Area Flowmeters, Field Indicators, Ratemeters, Totalizers, MAG RF Pickups.

2011©Copyright HII Group. All Rights Reserved