Dual Independent Hydraulic Carts

Hydraulics International, Inc. (HII) has over 40 years history of cutting-edge aircraft ground support equipment (GSE) ingenuity and new product technology innovation. HII is one of the world’s leading manufacturers of both military and commercial aircraft ground support equipment (GSE). HII build Portable Hydraulic Test Stands (HTS) with more modern, reliable, maintainable and supportability for replacing all existing old HTS of different models. 

Dual Independent Hydraulic Carts

F-16 Universal Hydraulic Test Stand (UHTS)
Dual Independent Hydraulic System
Diesel Dual Independent UHTS

As the legacy hydraulic test stands such as MJ-2A, MK-3A, TTU-228-1A&B, AM27T-2A and 88043-100 (NSN: 4920-01-279-4762) in the US inventory with old technology are aging over 30 years, United States Air Force (USAF) has contracted Hydraulics International, Inc. to design and develop the new generation of Hydraulic Test stands with the latest state of the art features and components.
These Universal Hydraulic Test Stands (UHTS) have been qualified to the most rigorous military requirement testings such as environmental, Electro Magnetic Interference, Mobility, reliability, maintainability, etc.
Some of the new features are TIER III multi-fuel engine, fully military qualified hydraulic purification system, system diagnostic, built-in test system and Human Machine Interface touch screen operator panel.

Aircraft Hydraulic Purification Performance

1)   Contaminant   removal: 55 gallon of hydraulic fluid in 5 hours.

2) Water: From   1000 to less than 200 PPM.

3)  Chlorinated   solvents:  From 400 to less than 100 PPM.

4)  Air   & Gas: 100% dissolved air removal, 98% (by   volume) removal.

5)  Particulate:  Cleanliness level equal to or better than   NAS 1638 class 3.

Hydraulic Purification System (HPS) is integral built in UHTS to provide following:

UHTS is a (2-in-1) Unit

UHTS = PHTS + HPS

F-16 Universal Hydraulic Test Stand (UHTS)
Electric Dual Independent UHTS

Dual Independent Hydraulic Carts

F-35 Dual Independent Hydraulic Test Stands
Diesel Dual Independent Test Rigs

Although theses Dual Independent Hydraulic Rigs are designed and built for supporting the F-35 Joint Strike Fighter, these Units are also popular for supporting military Helicopter .

Aircraft Hydraulic Purification Performance

1)   Contaminant   removal: 55 gallon of hydraulic fluid in 5 hours.

2) Water: From   1000 to less than 200 PPM.

3)  Chlorinated   solvents:  From 400 to less than 100 PPM.

4)  Air   & Gas: 100% dissolved air removal, 98% (by   volume) removal.

5)  Particulate:  Cleanliness level equal to or better than   NAS 1638 class 3.

Hydraulic Purification System (HPS) is integral built in UHTS to provide following:

F-35 HTS is a (2-in-1) Unit

F-35 HTS = PHTS + HPS

Electric F-35 Dual Independent Hydraulic Carts
Dual Independent Hydraulic Rigs

Dual Independent Hydraulic System

MK-3A Dual Independent Hydraulic Test Stand

Although MK-3A is replaced by our new generation Universal Hydraulic Test Stand (UHTS), Air Force around the world still continue to acquire this Unit to support their F-16 or other military aircraft if Aircraft Hydraulic Purification is not required.

Electric Dual Independent Hydraulic System
Military Helicopter Dual Independent Hydraulic Mules

These Units are small, compact & lightweight built for operating onboard the aircraft carrier and are qualified to withstand high impact shock test of 18.5g force per attached MIL-S-901D. Suitable for supporting military aircraft & helicopter.

Diesel Dual Independent Hydraulic System
Electric Dual Independent Hydraulic System

2011©Copyright HII Group. All Rights Reserved