Flowmetrics Inc is a leading manufacturer of Flow Metering / Analyzing / Totalizing Systems including In-Line and Insertion Turbine Flowmeter, Rotameter, and associated Flow Computers. For more than 35 years, they are recognized for superior Flow Measuring Products / Services and specialized Fluid Flow Systems. Turbine Flowmeters, Flow Computers, Positive Displacement Flowmeters, Signal Conditioners, Batch Controllers, Variable Area Flowmeters, Field Indicators, Ratemeters, Totalizers, MAG RF Pickups.
Turbine Flowmeters
ANSI Flange Connection
*
TURBINE FLOWMETERS APPLICATIONS
- Aerospace and Automobile fuel consumptions
- Natural Gas in industrial applications
- Hydraulics
- High-temperature, High-pressure, and High Shock
- Ultra-pure water in pharmaceuticals
- Petrochemicals
- Batching, Mixing, and Hygenic
- Custody transfer
- Cryogenics
FM Series Flowmeter
*
FM SERIES FLOW METERS are used for numerous applications in a variety of industries such as petrochemical, pharmaceutical, aerospace, and automotive. FM Series turbine flow meters are especially well suited for custody transfer of fluids in high-temperature, high-pressure, and high-shock applications. FM Series flow meters are available in a variety of sizes from 0.5” to 12”. The FM Series flow meter offers a high tum-down with minimum uncertainty and very repeatable output.
FM SERIES SPECIFICATIONS
- Exceptionally reliable digital outputs. Used for a variety of liquid and gas flow sensing applications
- Sizes available for 1/2 inch to 12 inches
- Offers high turn-down with minimum uncertainty and very repeatable output.
- Ideal for fluids with viscosities of 500 cst or less for 2 inch and larger flow meters
- Ideal for fluids with viscosities of 200 cst for smaller than 2 inch flow meters.
- Quick response time
- Low rotor inertia
- Suitable for measuring fluctuating flows
- Requires digital readout for pulsating flows
FMT Turbine Flowmeter
*
FMT SERIES FLOW METERS are capable of measuring extremely low flow rates (0.002 GPM in liquids and 0.01 ACFM in gases). The FMT flow meter is a unique volumetric device which uses a dual-orifice design to direct a stream of fluid tangent to a low mass/balanced rotor and a precision bearing to provide maximum sensitivity. This geometry also eliminates the need for flow straighteners and allows for greater repeatability.
FMT TURBINE SPECIFICATIONS
The Flowmetrics Tangential turbine flow meter is a unique volumetric device. This uses a dual orifice design to direct a stream of fluid tangent to a low mass/balanced rotor and a precision bearing to provide maximum sensitivity.
- Exceptionally reliable digital outputs. Used for a variety of liquid and gas flow sensing applications
- Well suited to meet a variety of proccess media
- Capable of measuring extremly low flow rates (.001 GPM liquids and .001 ACFM in gases)
- High output and low drag magnetic pickoffs
- Zero drag modulated carrier pickoffs
- Bearing to suit specialized applications
- NIST traceable calibration
FMP Insertion Turbine Flowmeter
*
FMP SERIES INSERTION FLOW METER prime application is large diameter pipes or ducts where traditional flow meter equipment is bulky, expensive, or difficult to maintain. FMP Series are well suited in applications exhibiting high-pressure drop characteristics and/or limited flow ranges where “in-line” flow meters would not be suitable.
FMP TURBINE SPECIFICATIONS
- Used for a variety of large diameter pipe liquid and gas flow sensing applications
- Exceptionally reliable digital outputs.
- Sizes available for 6 inch to 72 inch line size
- Linearity: +/- 1% full scale (liquid or gas)
- Repeatability: +/-0.1% of reading (liquid or gas)
- Temperature: -430° F to 400° F (optional up to 750° F)
Flowmetrics, Inc © 2007 | All Rights reserved