*
Hydraulics International, Inc. (HII) has over 40 years history of cutting edge aircraft ground support equipment (GSE) ingenuity and new product technology innovation. HII is one of the world’s leading manufacturers of both military and commercial aircraft ground support equipment (GSE), especially in the supply of our new generation Hydraulic Test Equipment, which will keep hydraulic system in aircraft, helicopter, aircraft hydraulic flight components, hoses, pipes, tubing, valves, valve actuation etc. operating safely and effectively. Our Hydraulic Test Equipment are also robustly designed to provide diagnostic instrumentation for innovative testing, self-calibration, maintaining, servicing and troubleshooting of hydraulic equipment, components & system under testing. HII is the preferred Provider of our new generation Portable Hydraulic Test Stands, Stationary Hydraulic Test Benches etc. to the military & commercial aerospace industry.
HAWK Aircraft GSE
PORTABLE HYDRAULIC POWER UNITS
Portable Hydraulic Test Stands / Carts / Rigs)
Diesel Engine Driven (P/N: 040489-100)
Test Medium: Hydraulic fluid, MIL-H-83282, MIL-H-5606, Skydrol 500A and B, HyJet IV and V, or as specified by customer when ordering.
Flow Rate Capacity:
32 GPM at 3000 PSI, 22 GPM at 5000 PSI
Can operate up to 6,000 feet!
Electric Motor Driven (P/N: 040499-100)
Test Medium: Hydraulic fluid, MIL-H-83282, MIL-H-5606, Skydrol 500A
and B, HyJet IV and V, or as specified by customer when ordering.
Can operate up to 6,000 feet!
Flow rate Capacity: 40 GPM at 3000 PSI, 25 GPM at 5000 PSI
Hydraulics International, Inc. (HII) is under Contract in the United States to build these new Units (P/N: 040489-100 & 040499-100) with more modern, reliable, maintainable and supportability for replacing all their existing old Units of different models. These new Units can be used to support military or civil helicopters based ashore or afloat including supporting intermediate activities at the flight line or in hangars, at air stations and air capable ships. These new Units are designed to troubleshoot and functionally check helicopter or any aircraft hydraulic systems. Besides having incorporated the latest state of the art innovations, these Units also come with a much higher capacity (flow rate & pressure). These Units come with NATO or National Stock Numbers and are fully provisioned for spare and replacement parts for more than 20 years. Although specifically designed and built for supporting all military helicopter including those built by other Countries, these Units can also support fixed wing military aircraft including narrow body aircraft such as Boeing B737, B757, AIRBUS A318, A319, A300, A310, A320, A321, C919, ARJ21, M-700, An-26, An-30, An-124, Il-76, Il-476, An-70, MiG-21, MiG-23, MiG-25, MiG-27, MiG-29, Su-17 (Su-22), Ka-28, Ka-32, Ka-50, Ka-52, Y-5, Y-6, Y-7, Y-8, Y-9, Y-10, Y-11, Y-12, Y-20, Z-5, Z-6. Z-8, Z-9, Z-11, Z-12, EC-120, Z-15 / EC175, Z-19, AC313, AC310, ERJ145, SAAB340, ATR72, Superjet 100, BAE146, BAE HAWK, F28, Falcon Jet etc or as long as the capacity of the hydraulic system is within the range of test stand flow and pressure.
These Units are designed and built for connecting to US Navy Standard Hydraulic Fluid Purifiers (P/N: 040505-100) to provide removal of hydraulic fluid particulates, water, chlorinated solvents, absorbed air & gases, which is common problem with aircraft.
*
CABIN PRESSURIZATION AND LEAKAGE TESTER
Qualified and in-service with the USAF, USN, USMC. Services all rotary and fixed wing military and commercial aircraft.
Flow 400 SCFM
Diesel Engine Drive (AF/M32T-1, P/N: 93038-100, NSN: 4920-01-381-4950
Flow 400 SCFM
Electric Motor Driven (AF/M24T-3, P/N: 78011-100, NSN: 4920-01-063-0120)
Electric Motor Driven (AF/M24T-3, P/N: 96384-100, NSN: 4920-01-435-8545)
*
*
AIRCRAFT BOMB LOADERS
P/N: 8141050-70 (NSN: 1730-01-491-1557)
Diesel Engine Driven
*
P/N: 050025-100 (NSN: 1730-01-536-6388)
Electric Motor Driven
MJ-1E AERIAL STORES LIFT TRUCK – Justification & Approval
Hydraulics International Inc. Wins $8.83 Million Federal Contract (Date: September 19, 2015)
Hydraulics International Inc. was awarded an $8,835,210 sole-source federal contract by the U.S. Air Force Life Cycle Management Center, Robins Air Force Base, Georgia, for the manufacture and supply of 62 MJ-1E aerial stores lift trucks.
Solicitation Number: FA8532-14-R-31710
Agency: Department of the Air Force
Office: Air Force Material Command
Location: PK/PZ – Robins AFB
*
APPLICATION
Standard equipment for loading/unloading & transporting of aerial stores including munitions, fuel tanks,
pylons, special weapons, & SAR pack weighing up to 3,000 pounds onto/into tactical aircraft.
*
Hydraulic International, Inc. (HII) was awarded a Contract to supply up to 300 Units of High Purity Self Generating Nitrogen Servicing Carts (HPSGNSC), NSN: 3655-01-545-4410 and 3655-01-545-2483 worth Total Estimated Amount of $42,351,675.00. These units are self-contained, towable, high purity carts that produce gaseous nitrogen at a 99.5% purity level, a pressure of 5000 psi, and high flow of not less than 30 Standard Cubic Feet per Minute (SCFM) in both diesel and electric power configurations, with oil free design compressors and pressure boosters.
See Solicitation Number: FA8533-12-R-30143 (US Air Force)
https://govtribe.com/project/high-purity-self-generating-nitrogen-servicing-cart-hp-sgnsc
High Purity Self Generating Nitrogen Service Cart
(HP-SGNSC)
Electric Driven
P/N: 130010-100
NSN: 3655-01-621-3781
This Nitrogen Servicing Cart is a self-contained, enclosed, skid mount, electric driven designed to produce gaseous Nitrogen at a flow of 30 Standard Cubic Feet per Minute (SCFM), at purity of 99.5% or better, and a pressure of 5,000 Pounds per Square Inch Gauge (psig) to the flight line and the maintenance shops to support multiple airframes. The nitrogen servicing cart can be used to perform the following functions:
• The low pressure side of the nitrogen cart provides a source of Nitrogen at controlled pressures of 0-400 PSI to service aircraft tires or other components.
• The high pressure side of the nitrogen cart provides a source of Nitrogen at controlled pressures of 0-5000 PSI to service aircraft high pressure nitrogen system and components.
• Fill up on-board storage bottles with 5,000 PSIG pure 99.5% Nitrogen or better in less than 45 minutes at ambient
temperature.
*
Features:
• Automated PLC controlled Nitrogen generation and filling with minimum operator interaction limited to “ON” and “OFF” operation.
• Sophisticated automatic and continuous Nitrogen purity control and calibration with on-board purity analyzer
• Full operation and maintenance diagnostic via Human Machine Interface (HMI) touch screen with fault logs and
troubleshooting aid.
• Unlike any other Nitrogen generators in the market, HII 100% Oil-less feed and high pressure air compressors
eliminate the need for oil separators, as a result extending the life of the Nitrogen separation membranes, eliminating oil filter change, maintenance resulting in reduction of the overall life cycle cost of the HPSGNSC.
*
High Purity Self Generating Nitrogen Service Cart
(HP-SGNSC)
Diesel Engine Driven
P/N: 130009-100
NSN: 3655-01-621-3426
This Nitrogen Servicing Cart is a self-contained, enclosed, four wheel, towable, internal combustion engine, trailer mounted cart, designed to produce gaseous Nitrogen at a flow of 30 Standard Cubic Feet per Minute (SCFM), at purity of 99.5% or better, and a pressure of 5,000 Pounds per Square Inch Gauge (psig) to the flight line and the maintenance shops to support multiple airframes.
The nitrogen servicing cart can be used to perform the following functions:
• The low pressure side of the nitrogen cart provides a source of nitrogen at controlled pressures of 0-400 PSI to service aircraft tires or other components.
• The high pressure side of the nitrogen cart provides a source of nitrogen at controlled pressures of 0-5000 PSI to service aircraft high pressure nitrogen system and components.
• Fill up on-board storage bottles with 5,000 PSIG pure 99.5% nitrogen or better in less than 45 minutes at ambient
temperature.
*
Features:
• Automated PLC controlled nitrogen generation and filling with minimum operator interaction limited to “ON” and “OFF” operation.
• Sophisticated automatic and continuous nitrogen purity control and calibration with on-board purity analyzer
• Full operation and maintenance diagnostic via Human Machine Interface (HMI) touch screen with fault logs and
troubleshooting aid.
• Unlike any other nitrogen generators in the market, HII 100% Oil-less feed and high pressure air compressors
eliminate the need for oil separators, as a result extending the life of the nitrogen separation membranes, eliminating
oil filter change, maintenance resulting in reduction of the overall life cycle cost of the HPSGNSC.
High Purity Nitrogen Applications
- Aerospace & Motor Industries for charging of tires, aircraft accumulators, struts etc.
- In Food and beverage industries, nitrogen is applied to flood the products with Nitrogen that takes out the oxygen and prolongs the product lifetime and freshness significantly because these organisms cannot develop. Furthermore, chemical degradation of food caused by oxidation can be eliminated or stopped.
- Analytical chemistry for Liquid chromatography–mass spectrometry and Gas Chromatography where a stable inert and continuous supply of Nitrogen is necessary.
- Chemical and petrochemical industries for the provision of inert environment aimed at ensuring general industrial safety during cleaning and protection of process vessels. Nitrogen is also used for pipelines pressure testing, chemical agents transportation, and regeneration of used catalysts in technological processes.
- Electronics industry, in which Nitrogen serves as an antioxidant in the manufacturing of semi-conductors and electric circuits, heat treatment of finished products, as well as in blowing and cleaning.
- Glass industry, where nitrogen proves efficient and cost effective way as a cooling agent for bow oven electrodes, oxidation inhibitor during process procedures, as well as air cooler.
- Metallurgy utilizes nitrogen as a method of protecting ferrous and non-ferrous metals during annealing. Besides, nitrogen is very helpful in such standard industry processes as neutral tempering, cementing, hard brazing, stress relieving, cyanide hardening, metal-powder sintering and extrusion die cooling.
- Paint-and-varnish industry uses nitrogen for the creation of an inert environment in process vessels to ensure safety, as well as for oxygen displacement during packing in order to prevent polymerization of drying oils.
- Petroleum industry, where nitrogen is used to create an inert environment for preventing explosions and for improving fire safety, to support transportation and transfer of hydrocarbons. Furthermore, nitrogen is used for pipelines testing and purging, cleaning technological vessels and cleaning liquefied gas carriers and hydrocarbon storage facilities.
- Pharmaceutical industry, where nitrogen finds many applications in pharmaceuticals packaging, to ensuring against explosion, improving fire safety in activities where fine dispersed substances are used.
- Hypoxic air fire prevention system to produce air with a low oxygen and high nitrogen content.
- *
2011©Copyright HII Group. All Rights Reserved