Hydraulic Fluid Flow Measurement Flowmeters

Automotive Flowmeters

A flowmeter is a measuring instrument that measures the amount of liquid, gas, steam, powder, or a mixture of these substances flowing through a pipe or ditch. Various measurement methods are available depending on the purpose of measurement, the type and condition of the fluid, and the measurement conditions such as the measurement location including Hydraulic Fluid Flow Measurement Flowmeters.

Flowmeter Offshore Oil Gas Industry

Flow meters In the Energy Industry

Flowmetrics, Inc. is proud to be the preferred supplier of flow meter products and calibration services to many of the greatest organizations in the energy sector. The following is a collection of some of our most notable customers in this market and the specific Flowmetrics products and services they currently use:

Babcock & Wilcox Enterprises currently employs the Flowmetrics FM series turbine flow meter with the PA1001A signal conditioner and converter (in a polyurethane weatherproof housing) as well as the Hi-temp RF pickups. These flow meters are calibrated to measure the flow of hydrazine and water at Babcock & Wilcox nuclear power facilities.

The Knolls Atomic Power Laboratory (KAPL) currently operates the Flowmetrics FMT series tangential turbine flow meter with custom jewel bearings, RF Pickups, and the PA1001A signal conditioner and converter in weatherproof housing. These flow meters are calibrated to measure the flow of MIL-C-7024 which is a solvent designed for use in the calibration of fuel system components in gas turbines and aircraft reciprocating engines. KAPL also employs the Flowmetrics FM Series Turbine flow meter with Hi-temp MAG Pickups and the PA1001A signal conditioner and converter in the NEMA weatherproof housing. These flow meters underwent special Hydrostatic testing up to 3750 psi and are calibrated to measure the flow of demineralized water with trace amounts of ammonia.

Kenetech Windpower Inchas installed the Flowmetrics FM series turbine flow meter with 115/230 signal conditioner power supply for their customers.

Below is a list of several other notable businesses in the Energy sector which are utilizing Flowmetrics flow meter products and calibration services:

  • Amoco Corporation (now part of BP)
  • Chevron Corporation
  • ConocoPhillips Co.
  • Essential Turbine
  • Martin Marietta Energy Systems (now part of Lockheed Martin)
  • Royal Dutch Shell PLC
  • Santa Fe Energy
  • Texaco, Inc.

Hydraulic Fluid Flow Measurement Flowmeters

APPLICATIONS

Aerospace and Automobile fuel consumptions

Natural Gas in industrial applications

Hydraulics

High-temperature, High-pressure, and High Shock

Ultra-pure water in pharmaceuticals

Petrochemicals

                                        Oil Gas FlowmetersFEATURES

Exceptionally reliable digital outputs.

Used for a variety of liquid and gas flow sensing applications.

Sizes availble for 1/2 inch to 12 inches

Offers high turn-down with minimum uncertainty and very repeatable output.

Ideal for fluids with viscosities of 500 cst or less for 2 inch and larger flowmeters

Ideal for fluids with viscosities of 200 cst for smaller than 2 inch flowmeters.

SPECIFICATIONS

The Flowmetrics Tangential turbine flowmeter is a unique   volumetric device. This uses a dual orifice design to direct a stream of fluid   tangent to a low mass/balanced rotor and a precision bearing to provide maximum   sensitivity.

Exceptionally reliable digital outputs. Used for a variety of liquid and gas flow sensing applications

Well suited to meet a variety of proccess media

Capable of measuring extremly low flow rates

(.001 GPM  liquids and .001 ACFM in gases)

Flowmeter Indicator Computer Totalizer RatemeterClick photo to download Brochures.

Flowmetrics, Inc  © 2007 | All Rights reserved